Humax LAU-32TPVR - Manual (Page 46)

When you purchase your LCD-TV, you can run the Automatic Search.
It immediately performs Channel Search.(You can also run the digital TV channel
setup in Default Setting.)
1. Turns on the TV in the Digital TV mode.
2. Starts the Automatic Search
immediately. Please wait for
finishing the Channel Search.
If you want to stop the Channel
Search, select the OK button.
If the Channel Search is stopped
or finished, press the OK button
to save the result of the channel
search.
Once the channel search has
finished, you can enjoy digital
television.
Warning : If you exit the Automatic Search without fully completing
the channel searching procedure, you may not have any
digital TV channels stored. In this case, you can use the
Installation Menu to configure your LCD-TV as required.
Digital TV Channel Setup
45. Digital TV Channel Setup