Humax LAU-32TPVR - Manual (Page 29)

Language
1. Press the MENU button.
2. Select System using the ̵/̷ button, and press the OK or ൘ button.
3. Select Language using the ̵/̷ button, and press the ൖ or ൘ button to
select a particular language.
OSD Transparency
1. Press the MENU button.
2. Select System using the ̵/̷ button, and press the OK or ൘ button.
3. Select OSD Transparency using the ̵/̷ button, and press the ൖ or ൘ button
to set the transparency.
High : Medium : Low
AV Output
1. Press the MENU button.
2. Select System using the ̵/̷ button, and press the OK or ൘ button.
3. Select AV Output using the ̵/̷ button, and press the ൖ or ൘ button to
select a particular thing.
Digital TV : Analog TV : AV1 : AV2
Antenna Power
1. Press the MENU button.
2. Select System using the ̵/̷ button, and press the OK or ൘ button.
3. Select Antenna Power using the ̵/̷Gbutton, and press the ൖ or ൘ button
to select On or Off.
Aspect Ratio
You can select the picture format you prefer.
1. Press the MENU button.
2. Select System using the ̵/̷ button, and press the OK or ൘ button.
3. Select Aspect Ratio using the ̵/̷Gbutton, and press the ൖ or ൘ button
to select a particular thing. You can also set the Aspect Ratio simply
by pressing the ASPECT RATIO button.
_ Auto : The screen format will automatically become enlarged,
allowing you to view the picture at its maximum size.
_ 4:3 , 14:9 , 16:9 : Setting for the 4:3, 14:9, or 16:9 screen format.
_ Zoom1, Zoom2 : Expansion to the Zoom1 or Zoom2 ratio.
Note : If you wish to change the Aspect Ratio, you must set the PIP/TWIN
mode to Off. To enlarges the picture to the wide aspect ratio in the
Digital TV mode, press the WIDE button. Although the channel is
changed, the wide aspect ratio keeps.
Backlight Brightness
1. Press the MENU button.
2. Select System using the ̵/̷ button, and press the OK or ൘ button.
3. Select Backlight Brightness using the ̵/̷ button, and press the ൖ or ൘ button
to set the brightness of LCD panel.
High : Medium : Low
28