Husqvarna 18 ProFlex - Manual (Page 13)

English –
11
Cutting unit
Rider 18 ProFlex and Rider 20 ProFlex can be
equipped with numerous attachments.
The BioClip unit finely cuts the lawn by cutting the
grass several times before returning the clippings to
the lawn as fertiliser.
The cutting unit with side or rear ejection, that is, the
clippings are ejected to the side or behind the unit.
PRESENTATION
Examples of the accessories for Rider:
• Brush
• Snow plough
• Wheel weights
• Snow chains
• Dozer
• Edger
• Electric attachment lift
• BioClip cutting unit
• Gravel rake
• Trailer
Lowering of the cutting unit
Lifting of the cutting unit
2. Press in the lock button and move the lever
forwards for the mowing position.
The unit will lower down and the blades start to
rotate.
3. The lever can also be used to temporarily
regulate the cutting height, e.g. for a small
mound in the lawn.
Lift lever for cutting unit
The lift lever is used to set the cutting unit in
transport or mowing position.
1. Pull back the lever to the locked position for
transport.
The cutting unit will lift up and the blades stop
rotating.