Husqvarna 18 ProFlex - Manual (Page 18)

16
– English
Stopping the engine
Preferably allow the engine to idle for a minute to
obtain normal working temperature before stopping
it if it has been working hard.
1. Lift up the cutting unit by pulling the lever back
to the locked position.
2. Move the throttle control to the MIN. position.
Turn the ignition key to the STOP.
Disengage lever
To move the machine when the engine is switched
off the disengage lever must be pulled backwards.
DRIVING
!
WARNING!
Never drive the machine on ground at an
angle of more than 15°. Mow slopes
upwards and downwards, never across.
Avoid sudden changes in direction.
MAX 15