Husqvarna 18 ProFlex - Manual (Page 14)

12
– English
PRESENTATION
!
WARNING!
Petrol is highly inflammable. Exercise
care and refuel outdoors (see safety
instructions).
Fuelling
The engine should be run on at least 85 octane,
unleaded petrol (not mixed with oil).
Seat
The seat has a jointed attachment on the front edge
and can be tipped forward.
The seat can also be adjusted lengthways.
To adjust move the lever under the front edge of the
seat to the left, so that the seat can be moved
forward or backwards to the required position.
Parking brake
The parking brake is applied as follows:
1. Push down the brake pedal.
2. Push in the lock button on the steering column.
3. Release the brake pedal while holding the
button pressed.
The parking brake lock disengages automatically
when the brake pedal is pressed.
Lever for adjustment of the cutting
height
The cutting height can be adjusted to 7 different
positions with the cutting height lever.
To achieve an even cutting height it is important
that the tyre pressures are the same on the front
wheels (60 kPa).