HP UX B6941-90001 - Manual (Page 142)

142 Chapter 3
File Tree Layouts on the Managed-Node Platforms
File Tree Layout on SCO OpenServer Managed Nodes
File Tree Layout on SCO OpenServer
Managed Nodes
The ITO software on SCO OpenServer managed nodes is based on the
typical SVR4 platforms as follows:
Figure 3-13 ITO Software on SCO OpenServer Managed Nodes
Standalone Systems or NFS Cluster Servers
on SCO OpenServer
In general, standalone systems are treated as cluster servers.
The cluster server exports the /opt file system with read-only
permissions. The ITO software is located in the /opt/OV path, with the
same logical and physical path names.
NOTE By default, SCO OpenServer does not export the /opt file system. You
can enable ITO cluster operations manually by exporting the /opt file
system on one SCO OpenServer system, then mount it from other SCO
OpenServer systems. You must do cluster setup manually before the ITO
installation process so that it has an effect on the ITO installation.
bin conf tmp log
/opt/OV
OpC OpC OpC OpC
install
lib locale
<lang>
bin
conf
/var/opt/OV
include
LC_MESSAGES
B
B
bin
OpC
utils