HP UX B6941-90001 - Manual (Page 202)

202 Chapter 5
Configuring ITO
Preconfigured Elements
Broadcast
Broadcast is an ITO application that allows you to issue the same
command on multiple systems in parallel.
❏ UNIX:
Default user: opc_op.
Default password: none required, because application is started via
the ITO action agent.
NOTE If the default user has been changed by the operator, you must supply a
password.
❏ MPE/iX:
Default user: MGR.OVOPR.
Default password: none required, because application is started via
the ITO action agent.
NOTE If the default user has been changed by the operator, you must supply a
password.
❏ Windows NT:
Default user: opc_op.
Default password: none required, because application is started via
the ITO action agent.
NOTE If the default user has been changed by the operator, you must supply a
password.
Tools ✓
UN*X Tools ✓
Virtual Terminal ✓
Name Application
Application
Group