HP UX B6941-90001 - Manual (Page 434)

434 Chapter 10
Tuning, Troubleshooting, Security, and Maintenance
Changing Hostnames/IP Addresses
4. Select the managed nodes in the Node Bank window, and click
[Get Map Selections] in the Distribute ITO Software
and Configuration window.
5. Click [OK] .
If you are operating ITO in a distributed management server
environment (Manager-of-Manager environment)
If you are running ITO in a multi-management server environment
(refer to
opcmom(4) for more details), perform the following steps:
1. Follow steps 2 through 7 above on all management server systems
that control or monitor the modified node.
2. Carry out step 8 on all ITO management server systems that refer in
any ITO template to the old hostname.