Husqvarna HUV4210-GXP - Manual (Page 18)

Controls and Indicators
5
Figure 8 Forward/Reverse Handle – Gas Vehicle
31
Figure 9 Forward/Reverse Rocker Switch – Electric
Vehicle
77
Figure 10 Accelerator and Brake Pedals
ACCELERATOR PEDAL
The accelerator pedal is the pedal on the right, with the word GO molded into it (Figure 10).
Electric Vehicles
The operation of the accelerator pedal differs from that of an automobile. When the key switch is in the ON position,
and the Forward/Reverse switch is in either the FORWARD or REVERSE position, pressing the accelerator pedal will
automatically release the park brake and start the vehicle moving in the direction selected (forward or reverse). As
the accelerator pedal is pressed, speed will increase until full speed is reached. When the accelerator is released,
power will be cut off and the motor will stop running.
Page 16 2009 HUV4210 Owner’s Manual