Husqvarna HUV4210-GXP - Manual (Page 37)

Periodic Lubrication Schedules
PERIODIC LUBRICATION SCHEDULE – GASOLINE VEHICLES
REGULAR INTERVAL SERVICE
LUBRICATION
POINTS
RECOMMENDED LUBRICANT
Brake pedal shaft bearings 1 Dry Moly Lube (Husqvarna 603 00 00-01)
Brake linkage and pivots 2 Dry Moly Lube (Husqvarna 603 00 00-01)
Accelerator push rod pivots, mounts,
and shifter cable pivots
Dry Moly Lube (Husqvarna 603 00 00-01)
Front suspension (5 fittings) Chassis Lube (EP NLGI Grade 2)
Semiannually by owner
trained technician (or every 50
hours of operation, whichever
comes first)
Brake slides Dry Moly Lube (Husqvarna 603 00 00-01)
Annually by trained technician
only (or every 100 hours of
operation, whichever comes
first)
Check/fill unitized transaxle to plug
level
27 oz. (0.8 L) 80-90 WT. API Class GL-3 or
80-90 WT. AGMA Class EP Gear Lube
First change 100 hours –
additional change every
200 hours of operation, or
annually, whichever comes
first.
Change engine oil and oil filter 7
32 oz. (0.95 L) without filter; 38 oz. (1.12
L) with filter
4
7
3
4
3 4
2
2
1
1
4
4
3
6
5
5
3
3
16
Figure 19 Lubrication Points – Gasoline Vehicles
2009 HUV4210 Owner’s Manual Page 35