Husqvarna HUV4210-GXP User Manual
Page 34
Periodic Service Schedules
PERIODIC SERVICE SCHEDULE – ELECTRIC VEHICLES
REGULAR INTERVAL
SERVICE
Pre-Operation and Daily Safety Checklist
See Pre-Operation and Daily Safety
Performance Inspection
See Performance Inspection on page 21.
Daily service by owner
Batteries
Charge batteries (after each daily use only).
Weekly service by owner
Batteries
Check electrolyte level. Add water if
necessary. See page 36.
Batteries
Wash battery tops and clean terminals with
baking soda/water solution.
Tires
Check air pressure and adjust if necessary.
See Vehicle Specifications on page 48.
Monthly service by owner or trained
technician
General vehicle
Wash battery compartment and underside of
vehicle.
Check brake shoes; replace if necessary.
See Wheel Brake Assemblies Section in
the appropriate maintenance and service
manual.
Lubricate brake slides per Lubrication
Schedule. See Wheel Brake Assemblies
Section in the appropriate maintenance
and service manual.
Brake system
Check brake cables for damage; replace if
necessary.
Electrical wiring and connections
Check for tightness and damage.
Forward/Reverse switch
Check condition of contacts and wire
connections. Make sure connections are tight.
Semiannual service by trained technician
only (or every 50 hours of operation,
whichever comes first)
Front wheel alignment and camber
Check and adjust as required. See Steering
and Front Suspension Section in the
appropriate maintenance and service
manual.
Motor controller output regulator (MCOR)
Check for loose hardware, cracks and other
damage.
Annual service by trained technician only
(or every 100 hours of operation, whichever
comes first)
Batteries
If batteries are not performing as expected,
see Batteries Section in the appropriate
maintenance and service manual.
Page 32
2009 HUV4210 Owner’s Manual