Navigating the menus, Summary, Getting started – High End Systems High End LCD Controller for Studio Color User Manual
Page 118
5-4
Navigating the Menus
Studio Color LCD Controller
Navigating the Menus
This section explains how to use the menu system. More
information is contained in subsequent sections in this
chapter.
Summary
•
Press the
<Menu>
key to enter and exit the menu system.
If you’re in the menu system, pressing the
<Menu>
key
takes you completely out of the menu system, no matter
where you are, saving the options you selected.
•
Press the Cursor
<Up>
and
<Down>
arrow keys to move up
and down through the menu system one level at a time.
•
Use the Cursor
<Right>
and
<Left>
arrow keys to move
between menu options.
•
Typically, you use the Construct
<Up>
and
<Down>
arrow
keys to change parameter values; a message appears in
the LCD display telling you if another key is required.
•
You also use the Construct
<Up>
and
<Down>
arrow keys
to scroll through pages on multi-page screens.
Getting Started
Upon powering up the controller, after its power-on self-test
successfully completes, the LCD display appears as shown
below:
Press the
<Menu>
key to access the menu system. The LCD
display then appears as shown below. This is referred to as
construct
7 #88
#+
- *#+
cursor