High End Systems High End LCD Controller for Studio Color - Manual (Page 197)

Studio Color LCD Controller Glossary G-1
Glossary
Access Modes
The controller offers the following two remote access modes:
• Page access: An attached analog controller accesses
pages in memory. See Chapter 6 for more information.
• Preset access: An attached analog controller access
presets, either by 12-level preset access or binary preset
access as described in Chapter 6.
Address Mode
A mode of the controller that allows you to directly access
fixtures for programming pages. The Address LED on the
<Address>/<Preset> key is ON to indicate the controller is in
this mode.
Advance Modes
The controller offers the following four ways to advance the
pages in memory:
• Manual advance: Use the Page <Up> and <Down> arrow
keys to manually advance through pages in memory.
• Auto advance: Pressing the <Auto> key on the
controller’s front panel causes pages to advance
sequentially at the rate determined by the Delay construct
and the
<Rate> knob. This is the way to play back loops.
• Audio advance: Vary the rate of page advance; stop
page advance; and modulate color and dim changes using
an external audio source. See Chapter 6 for more
information.
• Random advance: When used with auto advance (and
optionally all-memory playback), sequences through
initialized (programmed) pages in random order.
PRESET
ADDRESS