High End Systems High End LCD Controller for Studio Color - Manual (Page 158)

6-28 Audio Input Playback Studio Color LCD Controller
Varying the Audio Sensitivity
Adjust the sensitivity of the audio advance modes to the
audio signal using the
<Audio> (level) knob located directly to
the right of the <Rate> knob. See Figure 6-5.
Figure 6-5. Adjusting the sensitivity of audio effects
to the audio signal.
Note If the Level LED does not come ON, or if you are
having difficulty triggering audio effects, check the
audio connections then increase the volume of your
audio source. If the volume is already high, reduce
the volume significantly then bring it back up again.
audio
least sensitive
(a faster beat or a
louder signal is
required to trigger
the audio effect)
level
most sensitive
(audio effects are
triggered more often)