High End Systems High End LCD Controller for Studio Color - Manual (Page 123)

Studio Color LCD Controller Selecting MSC or LSC 5-9
5
3. Press the Cursor <Down> arrow key to display the menu
options shown below:
4. Use the Cursor <Right> and <Left> arrow keys to select
;
)

, as shown below:
5. Press the Construct <Up> and <Down> arrow keys to change
the selection between

77;D 
)9/ 

or
;
$2$
(0*
D
 
)
.
6. Use the Cursor <Left> arrow key to select
  7
and
continue with the next section.
Setting the Device ID
The device ID is used by MSC and LSC to identify master
controllers.
• In LSC, ID 0 (zero) means that the device responds to
any ID. For example, if you were to send out commands
to device ID 7 or ID 14 or ID 112, the controller with
device ID 0 would respond. Device ID 0 is the default
setting.
• MSC uses device ID 127 instead of ID 0 to tell a device
to respond to any ID.
E7 G7 G)  
)

3  ,
 7A 5
 G G)  ;7 0-/: 
3  ,
 ; $2$
(0*
D
 
)