HP XLWW - Manual (Page 6)

6
specifications
H P N e t S e r v e r L H 4 a n d L H 4 r
Accessories
Product Accessory
1
Product No.
Memory • 256MB 50ns EDO DIMM Kit (4x64MB)
• 1GB 50ns EDO DIMM Kit (4x256MB)
• 1MB Video RAM
D6112A
D6114A
D4219A
Processors • Pentium III Xeon 550MHz, 512KB ECC L2 cache
• Pentium III Xeon 550MHz, 1MB ECC L2 cache
• Pentium III Xeon 550MHz, 2MB ECC L2 cache
D8529A
D8530A
D8531A
Storage Devices • 9.1GB Ultra3 SCSI disk drive (7,200rpm–common tray)
• 9.1GB Ultra3 SCSI disk drive (10,000rpm–common tray)
• 18.2GB Ultra3 SCSI disk drive (7,200rpm–common tray)
• 18.2GB Ultra3 SCSI disk drive (10.000rpm–common tray)
• 36.4GB Ultra3 SCSI disk drive (10.000rpm–common tray)
• 9.1GB low-profile, hot-swap Ultra3 SCSI disk drive (7,200rpm)
• 9.1GB low-profile, hot-swap Ultra3 SCSI disk drive (10,000rpm)
• 18.2GB low-profile, hot-swap Ultra3 SCSI disk drive (7,200rpm)
• 18.2GB low-profile, hot-swap Ultra3 SCSI disk drive (10,000rpm)
• 36.4GB low-profile, hot-swap Ultra3 SCSI disk drive (10,000rpm)
• 9.1GB Ultra/Wide SCSI disk drive (7,200rpm–common tray)
• 9.1GB Ultra/Wide SCSI disk drive (10,000rpm–common tray)
• 18.2GB Ultra/Wide SCSI disk drive (7,200rpm–common tray)
• 9.1GB low-profile, hot-swap Ultra2 SCSI disk drive (7,200rpm)
• 9.1GB low-profile, hot-swap Ultra2 SCSI disk drive (10,000rpm)
• 18.2GB low-profile, hot-swap Ultra2 SCSI disk drive (7,200rpm)
• 18.2GB low-profile, hot-swap Ultra2 SCSI disk drive (10,000rpm)
• 36.4GB half-height, hot-swap Ultra2 SCSI disk drive (10,000rpm)
P1213A
2
P1214A
2
P1215A
2
P1167A
2
P1169A
2
P1217A
2
P1168A
2
P1216A
2
P1166A
2
D9419A
2
D4911A
D7049A
D7176A
D6106A
D6107A
D7174A
D7175A
D8210A
Internal Storage Expansion Second drive cage for up to 6 additional hot-swap drives
3
D6077A
Disk Controllers & SCSI Cables • Integrated dual-channel HP NetRAID controller
• HP NetRAID-1Si controller (Ultra2 SCSI,1 channel)
• HP NetRAID-3Si controller (Ultra2 SCSI, 3 channels)
• HP NetRAID-4M controller (Ultra3 SCSI, 4 channels, 64MB cache)
• HP NetRAID-4M controller (Ultra3 SCSI, 4 channels, 128MB cache)
• HP Ultra/Wide SCSI PCI adapter
• 2.5m SCSI Cable to connect from HP NetRAID Family Controller to
External Storage
4
• HP NetServer LH 3/LH 4 Internal SCSI Cable Kit
5
Included
D2140A
D5955A
D9161A
D9351A
D5025A
D6020A
D4282B
1 Please see the HP NetServers Configuration Guide for important technical information when choosing your accessories or go to http://www.hp.com/go/netserver.
For HP SureStore backup see http://www.hp.com/storage .
2 Ultra3 SCSI performance can only be achieved by using an Ultra3 SCSI controller or an Ultra3 SCSI RAID Controller with the Ultra3 drives.
3 When used in RAID configuration, additional SCSI HBA (D5025A) is required to support tape devices. This upgrade includes cable to connect to internal SCSI
controller.
4 2.5m SCSI Cable 68-pin male ultra-high-density offset connector to 68-pin male high-density connector.
5 Use in HP NetServer LH 3/LH 4 when HP NetRAID Family Controller is used with internal storage.