HP 2500CMHP - Manual (Page 18)

To do this:
1.
Download the printer software. During download, you will be asked if
you wish to customize the printer software. If you choose not to, you
may run the Installer Configuration Utility later by double-clicking
on the HPINSCFG.EXE icon in the driver directory of the Starter CD.
2. Choose the options you wish to install.
3. Click OK.
4. The printer software will be installed according to this configuration
the next time you run SETUP.EXE
Installing PCL 5Ce Printer Software from the PCL 5Ce CD into a PC
1.
Start Microsoft Windows and make sure no other applications are
running.
2. Insert the PCL 5Ce CD into your CD-ROM drive.
3. Select Printers in the Control Panel.
4. Windows 3.1: Click Add, select Install Unlisted and Updated Printer
and click Install.
Windows 95/NT 4.0: Double-click on the Add Printer icon.
5. Select the printer driver INF file in the CD, <language>/<operating
system>/disk 1.
6. Follow the instructions that appear on the screen to complete the
installation.
Installing the PostScript Printer Software into a PC
Note: The PostScript Printer Software is available when you purchase a HP 2500CM
Printer or the HP 2500C PostScript upgrade kit. For more information, see
HP Supplies and Accessories.
1. Start Microsoft Windows and make sure no other Windows
applications are running.
2. Insert the PostScript CD into your CD-ROM drive.
3. Select File, Run in Windows 3.1 or select Start, Run in Windows
95/98/NT4.0.
4. At the Command Line Box, type the letter of your computer’s
CD-ROM drive followed by: \INSTALL (for example, d:\install).
5. Follow the instructions that appear on the screen to complete
instructions.
14