HP 2500CMHP - Manual (Page 55)

51
Memory HP 2500CM
20 MB standard RAM
Two 72-pin SIMM slots for additional memory (EDO, 60ns)
expansion up to a total of 76 MB
SIMM Memory upgrade apply only to PostScript and PCL 5Ce
and are to be in increments of 16MB.
Connectivity / Network HP 2500C & HP 2500C+
Management
Network-capable printer for DOS and Windows environments
HP PCL 3e Windows Driver Support for Windows NT 4.0, Windows
3.1x/95/98, Optional PCL 5Ce (PCL 5Ce is standard with
HP 2500C+ and for Europe, standard with HP 2500C/CM)
Centronics parallel, IEEE 1284 compliant
One network interface slot accepts optional HP MIO Print Servers
with support for Novell Netware, Microsoft LAN Manager, Windows
for Workgroups, Windows NT, IBM LAN Server, IBM OS/2 Warp*
and AppleTalk* (EtherTalk)
HP 2500CM
Network-ready printer for DOS, Windows and Macintosh
environments
HP PCL 3e Windows Driver Support for Windows NT 4.0, Windows
3.1x/95/98, Optional PCL 5Ce (for Europe, this is standard with HP
2500CM)
Centronics parallel, IEEE 1284 compliant
HP MIO 10/100T/BNC print server with support for Novell Netware
Microsoft LAN Manager, Windows for Workgroups, Windows NT,
IBM LAN Server, IBM OS/2 Warp*, Unix environment* and
AppleTalk* (EtherTalk)
Supports networking protocols IPX/SPX, TCP/IP, DLC/LLC,
AppleTalk* and NetBEUI
Adobe PostScript 3 drivers for Windows and Macintosh*
Automatic switching between languages and ports.
HP JetAdmin printer management software provides easy printer
setup, configuration and management. Latest versions available
from HP’s web site (http://www.hp.com/go/jetadmin)
HP WebJetAdmin printer management software available from
HP’s web site (http://www.hp.com/go/webjetadmin) for simple
installation, configuration and management from a common web
browser.
*Macintosh Postscript support will be available to Postscript users
as a free upgrade in Summer 1999.