HP 2500CMHP - Manual (Page 30)

8
7
5
6
4
4. Loosen the four screws on the metal panel to remove it.
5. Insert the SIMM into SLOT 3 or 4 at a 45° angle.
6. Rotate the top of the SIMM until it is upright and clicks into position.
7. Lift the plastic flap, place the metal panel on the Rear Access Door
and fasten the screws.
8. Reconnect all cables to the back of the printer and power ON the
printer.
9. Press [MENU] until INFORMATION MENU appears. Press [ITEM] until
CHECK TOTAL RAM SIZE appears and press [SELECT]. The LCD
display should show the total amount of memory installed.
26