Honeywell RCT8100 - Manual (Page 10)

Quick Installation Guide
8
Set the Jumper J2, on the back of the thermostat, if
you have connected a wire to the G terminal.
t
Specify Furnace Type 6.
HG Leave the jumper in this factory-set
position if you have a gas or oil furnace.
HE Place the jumper to this position if you
have an electric furnace.
J2 jumper
400-147-042-A (69-2336ES-01 RCT8100 TH147P Quick Installation Guide) ENG.fm Page 8 Thursday, October 1, 2009 10:36 AM