Connect wires (typical wiring) – Honeywell RCT8100 User Manual
Page 8
Advertising
Quick Installation Guide
6
1)
Match each labeled wire with the terminal having
the same letter.
2)
Loosen the terminal screws using a screwdriver,
insert the wires, then tighten the screws.
3)
Push any excess wire back into the wall opening.
r
Connect Wires (typical wiring)
5.
Remove jumper
if you have both
R and Rc wires.
400-147-042-A (69-2336ES-01 RCT8100 TH147P Quick Installation Guide) ENG.fm Page 6 Thursday, October 1, 2009 10:36 AM
Advertising