Document Outline

• .■ I ^^1,- ■ ^ í
• Caméra Parts and Functions
• WL-50 Wireless Controller
  • Operation lEHsl
• Viewfinder Dispiays
• Power Sources
  • Attaching Battery Pack |EQ
  • 1. Slide battery pack into power source compartment.
  • 2. Press battery pack until it clicks and locks in place.
  • Removing Battery Pack ШЭ
  • 1. Slide and hold ВАТТ EJECT switch up.
  • 2. Pull battery pack out, as shown.
    • Charging Battery Pack nsra
    • Using AC Power
    • CA-100 Compact Power Adapter
    • Using Car Battery
    • CB-110 Car Battery Adapter (option)
    • Attaching DC Coupler iTO
    • 1. Insert DC-100 DC Coupler into power source compartment.
    • 2. Connect DC-100 cable to compact power adapter (or car battery adapter).
• Setting Date and Time
  • 1. Turn camera on by pressing OPERATE button.
  • 2. Press and hold DATE button for more than 3 seconds. EEEl
  • 11. Press + and - buttons to scan minute display.
    • • Minute display rotates through 60 minutes. ^^9
  • 12. Press DATE button when correct minute is shown.
    • • Minute display stops flashing and auto date and time starts * •
• Camera Preparations
  • Attaching Strap
  • SS-300 Shoulder Strap
  • WS-20 Wrist Strap (option) @3
• Camera Recording
  • 1.
  • 2.
    • Attach power source.
    • Turn camera on.
    • Press A (EJECT) button.
    • Load video cassette and close video cassette compartment.
  • 6.
    • Press ISPJ/LP button to select tape mode.
    • Turn grip to desired position.
    • 7. Press start/stop button.
    • 8. Press start/stop button again to temporarily pause recording. ^0
    • 9. When recording has ended, press A (EJECT) button.
    • 10. Remove video cassette and close video cassette compartment again.
    • 11. Turn camera off.
    • Video cassette erasure prevention switch
• Record Search
  • 1. Place camera in record pause mode. BKl
  • 2. Press REC SEARCH + or - button to scroll forward or backward to locate recording start position.
  • 3. Press start/stop button.
• Record Review
  • 1. Place camera in record pause mode.
  • 2. Press © button.
  • 3. Press start/stop button to resume recording.
  • Record search (to resume recording) Bgra
  • Record review Bcia
• Edit-erase
  • 1. Make sure that :ic (asterisk) is dispiayed, then piace camera in record pause mode. Bgra
  • 2. Press E. ERASE button.
  • 3. Press start/stop button to resume recording.
• Recording Date and Time
  • 1. While recording or in record pause mode, press DATE button. ilEI
  • 2. Press DATE button again to end date and time recording.
  • Autofocus
  • Subjects Not Suitable for Autofocus
  • Manual Focus
  • 1. Press FOCUS [^/M button to select manual focus.
  • 2. Rotate zooming lever to telephoto end.
  • 3. Look through viewfinder and rotate focusing ring to focus on subject.
  • 4. Use zooming lever to frame subject properly.
  • Focus Lock
• Shooting with Video Light
  • Attaching Video Light 4i-a
  • 1. Insert video light plug into accessory shoe on the camera.
  • 2. Slide video light into accessory shoe until it stops.
  • 1. Press and hold lock release button.
  • 2. Slide video light out of accessory shoe.
  • Replacing Bulb
  • 1. Rotate the protector in the indicated direction.
  • 2. Puil out the old bulb.
  • 3. Insert a new bulb positioning the notch at the bottom.
  • 4. Rotate the protector in the indicated direction.
• Gain-up/Backlight Compensation
  • Gain-up Function 45-A
  • Backlight Compensation Function 45-B
• High-Speed Shutter
  • 1. Point camera at subject viewfinder.
  • and compose scene in
  • 2. Press SHUTTER button.
  • 3. Make your recording.
  • 4. Press SHUTTER button to return to normai shutter speed.
• Fade
  • 1. Press and hold FADE button during recording.
  • 2. Press start/stop button when scene has disappeared completely.
  • 3. Release FADE button.
  • Wireless Fade
  • 1. Place camera in record pause mode.
  • 2. Press F. START/STOP button.
  • 3. When scene is recorded, press F. START/STOP button again.
• Adding Titles to Recordings
  • Creating Character Titles
  • 1. Place camera in record pause.
  • 2. Press CHARACTER TITLE button for more than 3 seconds to display title lines in viewfinder.
  • 3. Press SHIFT button to move the cursor to position where you want to start the title.
  • 4. Use + and - buttons to scan list of title characters.
  • 5. When the character you want is displayed, press SHIFT button again to move to next cursor position.
  • 6. Follow steps 4 and 5 until your title is complete.
  • 7. When the title is finished, press CHARACTER TiTLE button. BQ
• Playback Connection
  • Connection Procedure EEgi
  • Connection Procedure ИДЯ
    • RU-100
    • Coaxial Cable with DIN-Connectors masi
  • Selecting Video Channel (European model)
  • 1. Turn TV on.
  • 2. Turn camera on.
  • 3. Press ■ (STOP) button to select playback mode.
  • 4. Press A (PLAY) button to start playback.
  • 5. Set RF unit’s G/l selector using flat-edge screwdriver.
  • 6. Set TV and video channel selector to video channei (video channei selector is factory-set to CH 32).
    • Coaxial Cable with DIN-Connectors
  • Selecting Video Channei (Australian model)
  • 1. Turn TV on.
  • 2. Turn camera on.
  • 3. Press ■ (STOP) button to select playback mode.
  • 4. Press -4 (PLAY) button to start playback.
  • 5. Set TV and video channel selector to video channel (video channel selector is factory-set to 1CH) using a flat-edge screwdriver.
• Playback Procedure
  • 1. Turn camera on.
  • 2. Press A (EJECT) button.
  • 3. Load video cassette in camera and cióse video cassette compartment.
  • 4. Press ■ (STOP) button to seiect piayback mode.
  • 5. Locate piayback start point.
  • 6. Press PLAY button to start playback.
  • 7. Press ■ (STOP) button to end playback.
  • 8. Turn camera off.
  • High-Frequency Feedback
• Special Playback Methods
  • A. Fast Forward Playback
  • B. Rewind Playback
  • C. Still Playback
  • D. High-Speed Search
• Tape Return
  • 1. When you locate a scene during playback that you want to watch again iater, press COUNTER RESET button.
  • 2. Press ■ (STOP) button when playback finishes.
  • 3. Press TAPE RETURN button.
  • 4. Press ► (PLAY) button.
• Editing to Another VCR
  • Using a VCR with a SCART Terminal
  • Connection Procedure
  • Using a VCR with Audio/Video input Terminal
  • Connection Procedure
  • Preparations
  • TV
  • VTR
• Canon E430 Video System Chart
• Carrying Cases
  • SC-300 Soft Carrying Case
  • HC-300 System Case
    • The HC-300 properly stores the following items
    • Opening the Case
    • Attaching Shoulder Strap
• Optional Accessories
  • CB-110
  • CB-110 Car Battery Adapter
  • BP-E718 Battery Pack
  • BP-E722 Battery Pack
  • BP-E722D Battery Pack
  • MC-100 Multi-battery Charger
  • RS-300 Rain Shield
  • VL-20 Battery Video Light
  • TL-37 Teie-con verier
  • WD-37 Wide-converter
  • FS-37 Fiiter Set
  • FS-37U Filter Set
  • RU-100 RF Unit
• Problems and Troubleshooting
  • The following warnings may appear in viewfinder:
  • Smear EQ
  • Poor playback picture on TV monitor EEI
  • What is condensation?
  • Condensation is iikeiy to occur when:
  • Preventing condensation
  • When condensation is detected
  • To start using camera again
• Cautions
  • B
    • F. Always Replace the Lens Cap.
    • G. Do Not Expose the Camera to Shock or Vibrations.
    • H. Avoid Sudden Changes in Temperature.
    • I. Do Not Disassemble the Camera.
    • J. Use the Battery Pack Correctly and Only Use Recommended Accessories.
    • Using Your Battery Packs Effectively
    • Immediately After Purchase
    • General Use
    • storage
    • Terminology
    • Maintenance
    • Keep the Heads Clean.
    • Clean the Camera with a Soft, Dry Cloth.
    • Store the Camera Properly.
    • Store Cassette Tape Properly.
    • Check the Operation of Each Component.
• Specifications
  • E430
    • Video recording system:
    • Audio recording system:
    • Image sensor:
    • Tape format:
    • Maximum recording time: Lens:
    • Focusing system:
    • Dimensions
  • VL-7 Battery Video Light
    • Central light intensity: Illumination angle:
• Caium