Attaching battery pack |eq, Slide battery pack into power source compartment, Removing battery pack шэ – Canon E 430 User Manual
Page 16: Slide and hold ватт eject switch up, Pull battery pack out, as shown, Using battery pack
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Attaching Battery Pack |EQ
1. Slide battery pack into power
source compartment.
• Insert the end marked with a triangle.
• Slightly loosen grip belt and press it down
for easy battery loading.
2. Press battery pack until it clicks
and locks in place.
Removing Battery Pack ШЭ
-
C aution
—-----------------------------------------------------
Be sure to turn camera off (the OPERATE indicator
goes off) before removing battery pack. Removal
during operation may cause damage.
1. Slide and hold ВАТТ EJECT
switch up.
2. Pull battery pack out, as shown.
14
Advertising