Canon E 430 - Manual (Page 3)

Canon iM4M @!)na®lls ia/M©
Before Using the Camcorder
Charging the Battery Pack Attaching the Battery Pack
Make sure the battery pack is fully
charged before use.
1. Connect the battery pack to the CA-
100 .
2
. Plug into a mains outlet.
When the battery pack is fully charged,
the charge indicator glows steadily.
1. Slide the battery pack into the power
source compartment.
Slightly loosen the grip belt and press it
down for easy battery loading.
2. Press the battery pack until it clicks
and locks in place.
Recording
Before recording, make sure a power source is
attached to the camcorder.
Advice for Shooting
1 . Press the OPERATE button to turn the
camera on.
2. Press the ^ (EJECT) button to open the
cassette compartment.
3. Load the cassette.
4. Close the cassette compartment.
5. Press the SP/LP button to select the tape
speed.
6. Press the start/stop button to start recording.
The tally lamp flashes rapidly and “REC” appears
in the viewfinder.
7. Press the start/stop button to place the
camera in record pause mode.
To continue recording
•
Press the start/stop button again.
To end operation
• Unload the cassette and turn the camera off.