Document Outline

• Introduction and Safety
  • Introduction
  • Safety
    • Safety terminology and symbols
    • Environmental safety
    • User safety
    • Ex-approved products
    • Monitoring equipment
  • Product warranty
• Transportation and Storage
  • Inspect the delivery
    • Inspect the package
    • Inspect the unit
  • Transportation guidelines
    • Pump handling
    • Lifting methods
  • Storage guidelines
    • Pump storage requirements
• Product Description
  • General description
  • Nameplate information
• Installation
  • Preinstallation
    • Pump location guidelines
    • Foundation requirements
  • Baseplate-mounting procedures
    • Prepare the baseplate for mounting
    • Install the baseplate using shims or wedges
    • Install the baseplate using jackscrews
    • Baseplate-leveling worksheet
  • Pump-to-driver alignment
    • Alignment checks
    • Permitted indicator values for alignment checks
    • Alignment measurement guidelines
    • Attach the dial indicators for alignment
    • Pump-to-driver alignment instructions
      • Perform angular alignment for a vertical correction
      • Perform angular alignment for a horizontal correction
      • Perform parallel alignment for a vertical correction
      • Perform parallel alignment for a horizontal correction
      • Perform complete alignment for a vertical correction
      • Perform complete alignment for a horizontal correction
  • Grout the baseplate
  • Piping checklists
    • General piping checklist
    • Suction-piping checklist
    • Discharge piping checklist
    • Final piping checklist
• Commissioning, Startup, Operation, and Shutdown
  • Preparation for startup
  • Remove the coupling guard
  • Check the rotation - Frame Mounted
  • Check the rotation - Close Coupled
  • Couple the pump and driver
    • Install the coupling guard
  • Bearing lubrication
    • Lubricating oil requirements
    • Acceptable oil for lubricating bearings
    • Lubricate the bearings with oil
  • Pump priming
    • Prime the pump with the suction supply above the pump
    • Prime the pump with the suction supply below the pump
    • Other methods of priming the pump
  • Start the pump
    • Minimum continuous recommended flow
  • Pump operation precautions
  • Shut down the pump
  • Make the final alignment of the pump and driver
• Maintenance
  • Maintenance schedule
  • Bearing maintenance
  • Required tools
  • Disassembly
    • Disassembly precautions
    • Prepare the pump for disassembly
    • Disassemble the close-coupled pump
    • Disassemble the frame-mounted pump
  • Preassembly inspections
  • Reassembly
    • Reassembly precautions
    • Reassemble the rotary assembly
    • Reassemble the close-coupled pump
    • Reassemble the frame-mounted pump
    • Complete the reassembly (close-coupled and frame-mounted pumps)
    • Assembly references
      • Bolt torque values
      • Impeller trimming guidelines
      • SP3298 volute insert trimming guidelines
  • Spare parts
    • Repair kits
• Troubleshooting
  • Operation troubleshooting
  • Alignment troubleshooting
• Parts Listings and Cross-Sectionals
  • 3298 XS group close-coupled pump in sizes 1 x 1-1/2 - 5 and 1-1/2 x 2-6
  • 3298 S group frame-mounted pump in sizes 1 x 1-1/2 - 6, 1 x 1-1/2 - 8, 1-1/2 x 3-7, and 2 x 3-6
  • 3298 S group close-coupled pump in sizes 1 x 1-1/2 - 6, 1 x 1-1/2 - 8, 1-1/2 x 3-7, and 2 x 3-6
  • 3298 M group frame-mounted pump in sizes 3 x 4 - 7, 1-1/2 x 3 - 8, 2 x 3 - 8, 1 x 2 - 10
  • 3298 M group close-coupled pump in sizes 3 x 4 - 7, 1-1/2 x 3 - 8, 2 x 3 - 8, 1 x 2 - 10
  • 3298 L group frame-mounted pump in sizes 1-1/2 x 3 - 10, 2 x 3 - 10, 3 x 4 - 10G, 3 x 4 - 10H, and 4 x 6 - 10
  • 3298 L group close-coupled pump in sizes 1-1/2 x 3 - 10, 2 x 3 - 10, 3 x 4 - 10G, 3 x 4 - 10H, and 4 x 6 - 10
  • SP3298 S group frame-mounted pump in sizes 1 x 1-1/2 - 6 and 2 x 3 - 6
  • SP3298 S group close-coupled pump in sizes 1 x 1-1/2 - 6 and 2 x 3 - 6
  • V3298 close-coupled S group pump in sizes 1-1/2 x 2 - 6, 2 x 3 - 6, 1-1/2 x 2 - 8 and M group size 1-1/2 x 2 - 10
  • Interchangeability drawings
  • Hydraulic coverage charts
• Other Relevant Documentation or Manuals
• Local ITT Contacts
  • Regional offices