Document Outline

• Section 1. SAFETY PRECAUTIONS
  • 1.1 General
  • 1.2 Pre-Operation
    • Operator Training and Knowledge
    • Workplace Inspection
    • Machine Inspection
  • 1.3 Operation
    • General
    • Trip and Fall Hazards
    • Electrocution Hazards
    • Tipping Hazards
    • Crushing and Collision Hazards
  • 1.4 Towing, Lifting, and Hauling
  • 1.5 Maintenance
    • Maintenance Hazards
    • Battery Hazards
• Section 2. USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
  • 2.1 Personnel Training
    • Operator Training
    • Training Supervision
    • Operator Responsibility
  • 2.2 Preparation, Inspection, and Maintenance
    • Pre-Start Inspection
  • 2.3 Function Check
    • From the Ground Control Station with No Load in the Platform:
    • From the Platform Control Station:
  • 2.4 Oscillating Axle Lockout Test (If Equipped)
  • 2.5 Inspection and Use of Fall Arrest System
    • Prior to Use Inspection
    • Inspecting Cable Tension and Slip Indicator
• Section 3. MACHINE CONTROLS AND INDICATORS
  • 3.1 General
  • 3.2 Controls and Indicators
    • Ground Control Console
    • Ground Control Indicator Panel
    • Platform Console
    • Platform Console Indicator Panel
• Section 4. MACHINE OPERATION
  • 4.1 Description
  • 4.2 Boom Operating Characteristics and Limitations
    • Capacities
    • Stability
  • 4.3 Engine Operation
    • Starting Procedure
    • Shutdown Procedure
    • Fuel Reserve / Shut-Off System
  • 4.4 Traveling (Driving)
    • Traveling Forward and Reverse
  • 4.5 Steering
  • 4.6 Platform
    • Platform Level Adjustment
    • Platform Rotation
  • 4.7 Boom
    • Swinging the Boom
    • Raising and Lowering the Tower Boom
    • Raising and Lowering the Main Boom
    • Telescoping the Main Boom
  • 4.8 Shut Down and Park
  • 4.9 LIFTING AND TIE DOWN
    • Lifting
    • Tie Down
  • 4.10 Oscillating Axle Lockout Test (If Equipped)
  • 4.11 Towing
  • 4.12 Tow bar (If equipped)
  • 4.13 Dual Fuel System (Gas Engine Only)
    • Description
    • Changing From Gasoline to LP Gas
    • Changing From LP Gas to Gasoline
  • 4.14 Re-synchronize Upright
    • Releveling Valve
  • 4.15 Air Compressor
    • Normal Startup Procedure
    • Normal Shutdown Procedure
    • Daily Operation
• Section 5. EMERGENCY PROCEDURES
  • 5.1 GENERAL
  • 5.2 INCIDENT NOTIFICATION
  • 5.3 EMERGENCY OPERATION
    • Operator Unable to Control Machine
    • Platform or Boom Caught Overhead
    • Boom Movement Prevented By Boom Control System
  • 5.4 EMERGENCY TOWING PROCEDURES
• Section 6. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
  • 6.1 Introduction
  • 6.2 Operating specifications
    • Dimensional Data
    • Capacities
    • Engine Data
    • Tires
    • Hydraulic Oil
    • Critical Stability Weights
  • 6.3 Maintenance and Lubrication
  • 6.4 Tires & Wheels
    • Tire Inflation
    • Tire Damage
    • Tire Replacement
    • Wheel Replacement
    • Wheel Installation
  • 6.5 Propane Fuel Filter Replacement
    • Removal
    • Installation
  • 6.6 Propane Fuel System Pressure Relief
  • 6.7 Supplemental Information
• Section 7. INSPECTION AND REPAIR LOG