5 inspection and use of fall arrest system, Inspection and use of fall arrest system -16 – JLG 740AJ ANSI Operator Manual User Manual
Page 42
SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
2-16
– JLG Lift –
3121650
2.5
INSPECTION AND USE OF FALL ARREST SYSTEM
The external fall arrest system is designed to provide a lanyard attach
point while allowing the operator to access areas of an aircraft for
inspection and maintenance purposes. Exit/Enter the platform
through the gate area only. The system is designed for use by one
person.
Personnel must use fall protection at all times. A full body harness
and shock absorbing lanyard, not to exceed 6 feet (1.8 m) in
length, is required when using the external fall arrest system.
DO NOT OPERATE ANY MACHINE FUNCTIONS WHILE OUTSIDE OF PLATFORM. BE
CAREFUL WHEN ENTERING/EXITING THE PLATFORM AT ELEVATION.
THE EXTERNAL FALL ARREST SYSTEM REQUIRES AN ANNUAL INSPECTION AND CERTI-
FICATION. THE ANNUAL INSPECTION AND CERTIFICATION MUST BE PERFORMED BY A
COMPETENT PERSON.
If inspection services are required, contact:
Flexible Lifeline Systems
14325 West Hardy Rd.
Houston, TX 77060
Phone: 281-448-8821