Document Outline

• SMART ANTENNA
  • Table of Contents
  • Foreword
  • 1 Introduction
    • Figure 1: SMART ANTENNA
  • 2 Installation
    • 2.1 Interconnections
      • 2.1.1 System Components
      • Figure 2: Standard Mount SMART ANTENNA
      • Figure 3: Mounting Adapter
      • Figure 4: 3 Mounting Screws and Washers
      • Figure 5: Central Cable Mount
      • Figure 6: Mounting Holes
      • Figure 7: Central Cable Mount
      • Figure 8: Open-Ended SMART ANTENNA Cable
      • Figure 9: Multi-Connector SMART ANTENNA Cable
      • Table 2: Cable Variations
      • Figure 10: Magnetic Mount Adapter
    • 2.2 Power/Communication Port
    • 2.3 SMART ANTENNA Location
    • 2.4 Installation Overview
      • Figure 11: Basic Setup
  • 3 Operation
    • Figure 12: Typical Operational Configuration
    • 3.1 Communications with the Receiver
      • 3.1.1 Serial Port Default Settings
    • 3.2 Getting Started
    • 3.3 Non Volatile Memory
      • Table 3: Non-Volatile Memory Data
    • 3.4 Default Configuration
    • 3.5 Configurable Parameters
      • 3.5.1 Mask Angle
      • 3.5.2 SMART ANTENNA Position
    • 3.6 Receiver States
      • 3.6.1 Non-Operational State
      • 3.6.2 Operational States
    • 3.7 Built-In Status Tests
    • 3.8 DATUM Support
  • 4 Positioning Modes of Operation
    • 4.1 Single-Point or Autonomous
      • 4.1.1 GPS System Errors
    • 4.2 Satellite-Based Augmentation System (SBAS)
      • Figure 13: The SBAS Concept
      • 4.2.1 SBAS Receiver
      • 4.2.2 SBAS Messages
  • 5 Troubleshooting
  • 6 Updating Receiver Firmware
    • 6.1 System Requirements
    • 6.2 Utility Installation
    • 6.3 Registration Key
      • Figure 14: Update Registration Window in DOS
      • Figure 15: Paste the Registration Key into the DOS Window
    • 6.4 Registration Key Accepted
      • Figure 16: Configuration Accepted
    • 6.5 Starting Software and Options Update
      • Figure 17: Update Utility Activation
      • 6.5.1 Programming Success
      • Figure 18: End of Programming Session
  • A Technical Specifications
    • A.1 SMART ANTENNA Dimensions
    • A.2 SMART ANTENNA Specifications
    • A.3 Connector Pin Assignments
      • Figure 19: SMART ANTENNA RS-232 7-Pin Connector Pinouts
      • Table 4: SMART ANTENNA RS-232 Configurations
      • Figure 20: SMART ANTENNA RS-232 6-Pin Connector Pinouts
      • Figure 21: SMART ANTENNA RS-422 12-Pin Connector Pinouts
      • Table 5: SMART ANTENNA RS-422 Configurations
    • A.4 Connections
      • Table 6: Connector Variations
    • A.5 Open-Ended SMART ANTENNA Cable
      • Figure 22: RS-232 6-Pin Open-Ended SMART ANTENNA Cable
    • A.6 Multi-Connector SMART ANTENNA Cable
      • Figure 23: RS-232 6-Pin Multi-Connector SMART ANTENNA Cable
      • Table 7: DB-9 Connector Pinout
  • B SMART ANTENNA Development Kit
    • B.1 Development Kit
      • Figure 24: Differential GPS Setup
    • B.2 StarView Software Installation
  • Index