Table 5: smart antenna rs-422 configurations, A.4 connections, Table 6: connector variations – Novatel SMART ANTENNA User Manual
Page 41: Smart antenna rs-422 configurations, Connector variations
Technical Specifications
Appendix A
SMART ANTENNA User Manual Rev 6
41
Table 5: SMART ANTENNA RS-422 Configurations
A.4
Connections
The following connector variations are available:
Table 6: Connector Variations
Part Number
a
a. The XXX in part numbers refers to software models. Please refer to the SUPERSTAR II Firmware
Reference Manual, see Reference [6] on Page 12.
SMART ANTENNA Configuration
b
b. For alternate signal assignments on these pins (such as TX2 and an external battery connection for
memory backup), please contact NovAtel Inc. as shown in Customer Service on Page 10.
SA-422-12W-XXX
White, 12-pin plastic connector, standard cable mount
SA-422-CMW-XXX
White, 12-pin plastic connector, central cable mount
DK-SA-422-12W-XXX
Dev kit, 12-pin plastic connector, standard cable mount
SMART ANTENNA
Connector
Manufacturer
Connector on the SMART
ANTENNA
Cable Mating Connector
RS-232
Switchcraft
7-pin plug: EN3P7MP
7-contact socket: EN3C7FC
RS-232
ConXall
7-pin plug: 7281-7PG-300
7-contact socket: 6282-7SG-3XX
RS-232
FCI
6-pin plug: 851-07A10-6P50
6-contact socket: 851-06TI0-6S50
RS-422 (standard mount)
Deutsch
12-pin plug: 680023-2212P1
12-contact socket: MMP26C-2212S1
RS-422 (central mount)
Deutsch
12-pin plug: MMP21-2212P1
12-contact socket: MMP26C-2212S1