Novatel SMART ANTENNA - Manual (Page 33)

Updating Receiver Firmware Chapter 6
SMART ANTENNA User Manual Rev 6 33
Figure 15: Paste the Registration Key into the DOS Window
6.4 Registration Key Accepted
A message confirms the Update software utility activation once the key has been entered, see Figure 16 below.
Press any key, for example <Enter>, to exit.
Figure 16: Configuration Accepted
6.5 Starting Software and Options Update
Once activated, the Update utility works until the date or session counter expires. Simply follow the
instructions on the screen. The Update utility prompts you to remove or apply power to the GPS receiver. The
sessions counter decrements every time a programming session is successfully executed. An example is shown
in Figure 17 below.
Figure 17: Update Utility Activation
NovAtel Inc. L1