1 introduction, Figure 1: smart antenna, Smart antenna – Novatel SMART ANTENNA User Manual
Page 13: Chapter 1 introduction
SMART ANTENNA User Manual Rev 6
13
Chapter 1
Introduction
The SMART ANTENNA, see Figure 1 below, is a rugged, self-contained GPS receiver and antenna designed
for harsh tracking environments. It accepts DGPS correction signals to further enhance accuracy. The SMART
ANTENNA provides position and velocity data for a variety of applications.
Features:
•
12-channel parallel “all in view” tracking
•
L1 C/A code and carrier phase
•
RTCM-104 differential corrections input
•
-135 dBm minimum tracking sensitivity
•
1PPS output aligned to GPS time 200 ns (typical)
•
Single +5 V power input
•
Reverse polarity and SAE J1455 load dump protected
•
1 Hz position, velocity and time (PVT) output
Available Model Features
1
:
•
Integrated carrier phase (CP) data (Message ID# 23, Measurement Block Data only works with
these models): 1 Hz or 5 Hz CP
•
SBAS (for example WAAS and EGNOS) support
•
5 Hz PVT output
•
Precise timing
•
DGPS base station software
Figure 1: SMART ANTENNA
1.
Refer to Appendix A of the SUPERSTAR II Firmware Reference Manual for models and their
capabilities.