Document Outline

• ENGLISH
  • 1 About this manual
    • 1.1 Typographical conventions
  • 2 Notes on copyright and information on trademarks
  • 3 Safety rules
    • 3.1 ATEX-IECEX certificate details
      • 3.1.1 Temperature:
      • 3.1.2 Installation instructions
      • 3.1.3 Mounting instructions
      • 3.1.4 Special conditions for safe use
      • 3.1.5 Additional information
  • 4 Identification
    • 4.1 Product description and type designation
    • 4.2 Product markings
  • 5 Versions
    • 5.1 Tempered glass
    • 5.2 Integrated wiper
    • 5.3 Germanium window
    • 5.4 Optical fiber
  • 6 Preparing the product for use
    • 6.1 Safety precautions before use
    • 6.2 Unpacking and contents
      • 6.2.1 Unpacking
      • 6.2.2 Contents
    • 6.3 Safely disposing of packaging material
    • 6.4 Preparatory work before installation
      • 6.4.1 Fixing to parapet
      • 6.4.2 Fixing with bracket
      • 6.4.3 Fixing the unit to the pole mount adapter or corner mount adapter
        • 6.4.3.1 Fixing with pole mount
        • 6.4.3.2 Fixing with corner adapter
  • 7 Assembling and installing
    • 7.1 Range of use
    • 7.2 Assembly
      • 7.2.4 Fixing the sunshield
      • 7.2.5 Fastening of the wiper blade
    • 7.3 Installation
      • 7.3.1 How to open the housing
      • 7.3.2 Cable entry
      • 7.3.3 Connection of the power supply line
        • 7.3.3.1 12Vdc and 24Vac power line connection (without power supply)
        • 7.3.3.2 120Vac and 230Vac power line connection (without power supply)
        • 7.3.3.3 12Vdc, 24Vac, 120Vac and 230Vac power line connection (with power supply)
      • 7.3.4 How to install the camera/lens
      • 7.3.5 Connection of the camera to the power supply
        • 7.3.5.1 Connection of the camera's power line in 12Vdc and 24Vac (without power supply)
        • 7.3.5.2 Connection of the camera's power line in 120Vac and 230Vac (without power supply)
        • 7.3.5.3 Connection of the camera's power line in 12Vdc, 24Vac, 120Vac and 230Vac (with power supply)
      • 7.3.6 Video signal output of an analogue camera
      • 7.3.7 Optical fibre connection
      • 7.3.8 Signal output of an IP camera
      • 7.3.9 Connection of the IP camera's RS-485 output
      • 7.3.10 Serial line connection
      • 7.3.11 Special controls
      • 7.3.12 Enabling the wiper
        • 7.3.12.1 Enable from the remote button
        • 7.3.12.2 Enable from the keyboard
      • 7.3.13 Enable the washing system from the keyboard
      • 7.3.14 Enable an external illuminator from the day/night camera output
      • 7.3.15 Closing the housing
      • 7.3.16 Earth wiring connection
  • 8 Instructions for safe operation
    • 8.1 Safe operation
      • 8.1.1 Commissioning
      • 8.1.2 Safety rules
      • 8.1.3 Explosion prevention rules
  • 9 Switching on
    • 9.1 Before powering the product in an explosive atmosphere
  • 10 Maintaining and cleaning
    • 10.1 Maintenance and cleaning by users
      • 10.1.1 Routine (to be carried out regularly)
        • 10.1.1.1 Cleaning the glass
        • 10.1.1.2 Replacing the rear bottom gasket
        • 10.1.1.3 Cleaning the germanium window
        • 10.1.1.4 Fuses replacement
        • 10.1.1.5 Cleaning the device
        • 10.1.1.6 Inspecting the cables
      • 10.1.2 Extraordinary (to be done only under particular circumstances)
  • 11 Disposal of waste materials
  • 12 Troubleshooting
  • 13 Technical data
    • 13.1 MHX
      • 13.1.1 General
      • 13.1.2 Mechanical
      • 13.1.3 Electrical
      • 13.1.4 Environment
      • 13.1.5 Certifications
      • 13.1.6 Accessories
      • 13.1.7 Brackets and adapters
    • 13.2 MHXT
      • 13.2.1 General
      • 13.2.2 Mechanical
      • 13.2.3 Electrical
      • 13.2.4 Environment
      • 13.2.5 Certifications
      • 13.2.6 Brackets and adapters
      • 13.2.7 Accessories
    • 13.3 Electrical rating
    • 13.4 Cable glands
  • 14 Technical drawings
  • A Appendix - Gas group classification