Furuno FM-8800S - Manual (Page 15)

1. MOUNTING
1-7
Junction box IF-8810/ DMC interface IF-8820
Note: DMC interface IF-8820 is not used for Russian version.
To install the remote box RB-8800/RB-8810, wing handset, etc., the junction box IF-8810 is
required. Install the junction box near the transceiver unit. Approx. 3 m cable is preattached
to the junction box to connect to the transceiver unit.
To connect Furuno’s distress message controller DMC-5, the DMC interface IF-8820
(option) is required.
1. Open the cover.
2. Mount the unit with four self-tapping screws (5x20).
Fixing holes 5mm dia.
240
100
Note: This plug is not
fitted in IF-8820.
Mounting the junction box/DMC interface