Furuno FM-8800S - Manual (Page 3)

i
SAFETY INSTRUCTIONS
WARNING
Hazardous voltage.
Can shock, burn or cause
serious injury.
Do not work inside the equip-
ment unless totally familiar
with electrical circuits.
Turn off the power at the mains switch-
board before beginning the installation.
Post a warning sign near the switch-
board to indicate that power should not
be applied while the equipment is being
installed.
Electrical shock, serious injury or fire can
result if the power is not turned off or is
applied while the equipment is being
installed.
Attach securely protective
earth to the ship's body.
The protective earth
(grounding) is required to the
AC/DC power supply unit to
prevent electrical shock.
Confirm that the power supply voltage
is compatible with the voltage rating
of the equipment.
Connection to the wrong power supply
can cause fire or equipment damage.
The voltage rating appears on the label
at the rear of the display unit.
Observe the compass safe distance to
prevent deviation of a magnetic
compass.
Standard
compass
Steering
compass
1.45 m
CAUTION
FM-8800S 0.90 m
1.45 m FM-8800D 0.95 m
0.85 m IF-8810 0.55 m
0.75 m IF-8820 0.50 m
1.50 m HS-2003 0.95 m
0.40 m HS-8800 0.30 m
1.20 m
RB-8800
0.80 m
1.50 m
RB-8810
1.00 m
(W/HS-8800)
(W/HS-8800)
0.90 m PR-240 0.60 m
Do not approach the antenna
closer than 0.9 m (MPE by
FCC) when it is transmitting.
(MPE: Minimum Permissible Exposure)
The antenna emits radio waves
which can be harmful to the
human body.
FM-8800S
RF power density
on antenna aperture
Distance
100 W/m 2 0.11 m
10 W/m 2 0.33 m
FM-8800D
2 W/m 2 0.9 m
0.11 m
Description
required by
IEC 60945
IEC 60945
MPE by FCC
IEC 60945
IEC 60945
MPE by FCC
0.33 m
0.9 m
100 W/m 2
10 W/m 2
2 W/m 2
1.55 m
RB-8810-W
(W/HS-8810-W)
1.00 m