Furuno FM-8800S - Manual (Page 32)

3-4
Grommets 2 places
Junction box
8. For the console w/printer, connect the printer cable for data transmission to the
PRINTER port of the Transceiver Unit and fix the power cable to the terminal board as
before. Then, fix the printer assembly to the console. For no printer, fasten the
concealing lid to the console.
Printer
J2
Printer cable
W/ Printer
View
Insert the mounting plate
for printer to the catch of the console
9. Fasten the cover assembly.
NOTE: If the console assembly is to be mounted on the hull, refer to paragraghs 1-9 and
2-10.