Fisher & Paykel E522B - Manual (Page 23)

21
Measured Fill
One useful feature of your water dispenser is it’s ability to dispense a pre-measured amount of
water. This comes in handy when cooking or preparing drinks.
Press the button to highlight the screen and again to cycle through the
preset quantities.
Fig.21 Metric display
Fig.20 US display
Push the dispensing pad to receive the pre-selected quantity of chilled water. The units will
count up to confirm operation.
If you stop dispensing part way through your pre-selected quantity the dispenser will
remember the remaining quantity to be dispensed for a short time. Simply continue by pressing
the pad.
The and buttons can be used to increase or decrease the pre-set measurements in 1 oz,
(25 ml) increments, to a maximum of 1 qt (1 L).
Changing the Measured Fill units
The pre-set measurements can be displayed in US imperial or metric units.
The unit setting can be changed by pressing the button to scroll to the screen
and pressing the and buttons until the desired units are displayed. To return to the
Measured Fill option, press the
button.
Using the display options
EN