FORD Vehicle User Manual

Page 150

Advertising
background image

148

resume CD play, press the “PLAY/STOP”
button once again.

*

[AS06750(BEF )04/95]

NOTE: If the ignition key is turned OFF

during play and then is set to the ON
or ACCESSORY position, the CD
player will resume playing in the mode
it was in when ignition was turned off.

*

[AS06760(BEF )04/95]

Using the “SEEK” feature

*

[AS06765(BEF )04/95]

The “SEEK” feature allows you to quickly find a
particular selection on the disc.

*

[AS06770(BEF )05/95]

Press the bottom (

b) half of the “SEEK” button

once to repeat the current playing selection.
Press the top (

a) half of the “SEEK” button to

advance to the next selection.

*

[AS06775(BEF )05/95]

Pressing and holding the bottom (

b) or top (a)

half of the “SEEK” button will scroll backward
and forward respectively through the tracks.

*

[AS06800(BEF )05/95]

How to fast forward or reverse your CD
player

*

[AS06850(BEF )05/95]

To quickly search for a particular point in a
selection, press the “FF” button (to fast forward)
or the “REV” button (to reverse). While either
button is pressed, the disc goes forward or
backward at two different speeds depending on
how long the button is held down. (Pressing
either button for more than approximately three
seconds will speed up the process.) Release the
button at the desired point (found by watching
the elapsed playing time in the display or by
listening to the sound during fast forward or
reverse). When you have reached the beginning
of track 1, the CD player will begin playing.

*

[AS06900(BEF )04/95]

When you have reached the end of the disc by
keeping the fast forward button pressed, the
display will show “END” and the player will go
into pause mode. Push the “PLAY/STOP”

File:ltasf.ex

Update:Thu May 9 15:15:21 1996

Advertising