FORD Vehicle User Manual

Page 349

Advertising
background image

350

*

[SV36500( ALL)10/89]

Check the brake fluid at least once a year. You
can do this by looking at the fluid level in the
plastic reservoir on the master cylinder. The
fluid level should be at or near the MAX mark.

*

[SV36550( ALL)05/95]

RWARNING

Brake fluid is toxic.

*

[SV36560( ALL)05/95]

If brake fluid contacts eyes, flush eyes with
running water for 15 minutes. Get medical
attention if irritation persists. If taken internally,
drink water and induce vomiting. Get medical
attention immediately.

*

[SV36600( ALL)02/95]

If the fluid is low, carefully clean and remove
the filler cap from the reservoir. Fill the
reservoir to the MAX line with Ford High
Performance DOT 3 Brake Fluid C6AZ-19542-AA
or DOT 3 equivalent fluid meeting Ford
specification ESA-M6C25-A.

*

[SV36850( ALL)12/91]

NOTE: If brake fluid is spilled on painted

surfaces, it must be flushed and wiped
away immediately. Brake fluid may
dissolve the paint finish on your
vehicle.

*

[SV36900( ALL)01/95]

RWARNING

If you use a brake fluid that is not DOT
3, you will cause permanent damage to
your brakes.

*

[SV37000( ALL)01/95]

Do not fill the reservoir above the MAX line.

*

[SV37100( ALL)01/95]

If you find that the fluid level is excessively low
— below the seam or ridge on the outside of the
plastic reservoir — have the brake system
inspected.

File:ltsvf.ex

Update:Thu May 9 15:30:19 1996

Advertising