FORD Vehicle User Manual
Page 258
257
%
*
[RE02900( ALL)03/95]
Removing jumper cables
*
[RE03000( ALL)03/95]
1.
Always remove the jumper cables in the
reverse order.
Remove the negative (
Ҁ) end
of the jumper cable from the metallic surface
on the engine or frame of the disabled
vehicle.
*
[RE03100( ALL)05/95]
2.
Remove the negative (
Ҁ) cable from the
booster battery.
*
[RE03200( ALL)03/95]
3.
Remove the positive (+) cable from the
booster battery.
*
[RE03400( ALL)05/95]
4.
Remove the other end of the positive (+)
cable from the discharged battery.
*
[RE03500( ALL)04/95]
After the vehicle is started, let it idle for a while
to let the engine “relearn” its idle conditions.
Drive it around for a while with all electrical
accessories turned off to let the battery recharge.
You may need to use a battery charger to fully
recharge the battery.
*
[RE03550( ALL)03/95]
If you need to replace your battery, see Battery
in the Servicing Your Vehicle chapter.
File:ltref.ex
Update:Thu May 9 15:24:41 1996