FORD Vehicle - Manual (Page 84)

82
* [IP01476(B F )03/95] To turn your air conditioner and heater system
on, select any position except OFF. This will turn
the fan on and allow airflow into the vehicle. To
turn your air conditioner and heater off, select
OFF. This will turn the fan off and stop airflow
from coming into the vehicle.
* [IP01477(B F )03/95] Temperature selection
* [IP01478(B F )05/94] The temperature knob is the rotating knob
located at the center of of the control with
tapered RED and BLUE bands surrounding most
of the knob. The wide RED part of the band
(full right) is the heat or warmer area. The wide
BLUE area (full left) is the cooling or cool
temperature area. Any position selected between
full right and full left will give a temperature
between the two extreme temperatures.
* [IP01479(B F )03/95] H Fan speed adjustment
* [IP01480(B F )05/94] The H knob on the control is the fan speed
knob which controls the volume of air flow.
Rotate the
H knob to the right to increase the
amount of air entering the vehicle. Four fan
speed positions are available and are indicated
by LO, two separate dots and HI beside the
H
control knob. The HI position provides the most
air flow.
* [IP01481(B F )08/94] Airflow selections
* [IP01482(B F )03/95] VENT
[IP01483(B F )02/95] Use VENT to bring outside air through the
instrument panel registers. You can heat the air
in this position by rotating the center knob into
the RED area. The air CANNOT be cooled
below the outside temperature regardless of the
center knob setting. Select NORM A/C or MAX
A/C to get cool air through the instrument
panel registers.
File:ltipf.ex
Update:Thu May 9 15:21:29 1996