FOCUS Enhancements FS-2/2E - Manual (Page 30)

FS-2 and FS-2E Studio DTE Disk Recorders User Guide
2 - 9
Part Number: MANL-0927-03
FS-2/2E FUNCTIONS
To enter the FS-2/2E MAIN MENU, press the
MENU key or soft key 1 (MENU) while in Stop
mode. The following MENU SCREEN appears:
Menu Items
The four line list indicates the currently highlighted
menu item. Push soft key 3 (under the symbol) to
see more selections. To scroll up through the menu,
press SHIFT + soft key 3.
Sub-Menu Available
The symbol at the end of a line indicates a menu
item that has a sub-menu available. Press the SEL
Soft Key, to display the sub-menu.
Soft Keys
EXIT -- Press EXIT to return to the
FS-2/2E MAIN MENU screen.
SEL -- Press SEL to select the current
menu item. If a sub-menu is available,
it will open.
Scroll Arrow -- The or symbol
allows you to scroll up or down through
menu items.
Record Menu
The FS-2/2E RECORD MENU allows you to enable
different record functions.
Select the mode. by pressing SEL to
open the sub menu.
Press EXIT to exit back to the menu
screen.
Once you select a particular mode in the Record
Mode menu, the FS-2/2E remains in that mode until
select a different mode.
Available items in the RECORD MENU are:
NORMAL REC
RETRO DISK
RETRO CACHE
LOOP RECORD
STILL
TIME LAPSE
NOTE: When an inserted or attached HDD is nearly
full, in some record sessions, the HDD time
remaining may display “001min” remaining. If you
press RECORD, the FS-2/2E sometimes displays
NO SPACE LEFT. Focus Enhancements advises
that when a disk drive is close to being full, you
make sure other disk drives are readily available in
order to avoid lost footage.
Normal Record
This is the standard and default record mode. When
you press REC, the FS-2/2E begins standard
recording. Press the REC once to put the FS-2/2E
into REC PAUSE mode. Press it again to put the
FS-2/2E into RECORD mode.
Press STOP once to pause your recording. To
STOP the recording session entirely, press STOP
once again. Use the REC button to restart the
recording.
Retro Disk
RETRO DISK Record constantly buffers video in a
loop to a determined amount of space on the hard-
disk drive so that when record is triggered, a retro
time period can be added to the beginning of any
clip. You can select the RETRO DISK value to close
the available disk drive space.
Set RETRO TIME by pressing the
and
buttons. Time is selectable in
one minute increments.
RECORD MODE
CONTROL MODE
PLAY MODE
PLAY FROM
EXIT SEL
RETRO DISK
HDD AVAIL:
183 MIN
RETRO TIME:
15 MIN
EXIT