FOCUS Enhancements FS-2/2E - Manual (Page 39)

FS-2/2E FUNCTIONS
FS-2 and FS-2E Studio DTE Disk Recorders User Guide
2 - 18
Part Number: MANL-0927-03
S TEP 2: Scroll to the desired clip, then select
NEXT. The clip information is
displayed.
Delete List
The DELETE LIST option allows you to delete an
entire playlist.
S TEP 1: Select DELETE LIST from the
PLAYLIST menu. All the playlists on
disk are displayed.
S TEP 2: Select the playlist you wish to delete
and press SEL. You are asked to
confirm the request: “DELETE
PLAYLIST XX-XX-XX? “
S TEP 3: Press YES to complete the deletion.
HDD Bypass
HDD Bypass mode allows the connected FireWire
hard drives to be mounted or dismounted to a
computer without removing them.
In this mode, the computer connects to the “HDD
I/O” port on the FS-2/2E Rear Connector Panel.
When you select HDD Bypass, the following
displays on the FS-2/2E LCD:
To Exit this mode, press the EXIT key.
Be sure to properly dismount the
FireWire drive from the computer
system before exiting HDD Bypass
mode on the FS-2/2E.
Internal HDD
The internal HDD function allows you to remove the
front mounted IDE drive from FS-2/2E without first
having to power the unit down.
Select INTERNAL HDD by pressing
the SEL button.
Answer YES to “Remove Internal
HDD?” (Select EXIT to abort.)
Remove the disk drive from the
FS-2/2E when prompted. To remove
the hard drive, push the latch on the
front right of the drive to the right. The
drive handle pops out from the face of
the drive. Then carefully pull the drive
out from the drive bay. Press EXIT to
complete the process.
To reinsert the drive, slide it back into
the drive bay and press the handle
back into place until you hear a click.
The drive will be recognized by the FS-
2/2E after about a minute.
0001 1-001
0002 1-004
0003 1-001
0004 1-003
NEXT
CLIP INFO
HDD: 01
CLIP 0001
00:00:01:23
00:00:02:00
EXIT BACK
03-20-20
06-20-20
03-25-20
03-30-20
EXIT SEL
GO TO HDD
BYPASS?
EXIT YES NO