John Wood SERIES 100 - Manual (Page 30)

30
MANIFOLD KITS
Precision cut type “L” all copper manifold kits assure water flow balance of all units. Without this balance, the full water heating and storage
potential of the system cannot be achieved. Plus, the units with the higher water flow may have a shortened life.
Dimensions shown are for minimum space occupied by the water heaters assemblies.
Space for the venting system and unit servicing must be added.
CAUTION: IF THE PLUMBING REQUIRES
THE USE OF PIPES WITH DISSIMILAR
MATERIAL (FOR EXAMPLE, STEEL AND
COPPER), USE DIELECTRIC UNIONS TO
PREVENT AN ELECTRO-GALVANIC ACTION
BETWEEN THE PIPING COMPONENTS
WITH DISSIMILAR MATERIALS.
Kit # 9006680005 Kit # 9006681005
Kit # 9006682005