Furuno FCV-30 - Manual (Page 15)

1. OPERATIONAL OVERVIEW
1-5
1.2.2 How to use the pop-up menus
1. Right-click anywhere on the screen, and a pop-up menu appears.
Indicates an
option menu
is available
Pop-up menu
2. Click the item desired. An item with ► indicates an option window; “…” (ellipsis) a
setting window. Currently selected option is marked with a filled circle.
Option window for "Mode".
Sliding
bar
Track
bar
Close button
Pop-up menu and shift setting window
3. Do one of the following according to item selected.
Operation from an options window
Roll the trackball to execute appropriate operation and then push the left button.
Operation from a setting window
There are three settings methods:
• Drag the sliding bar: Place the pointer on the sliding bar and hold down the left button
while rolling the trackball.
• Place the pointer on the track bar and then click with the left button
• With the track bar selected, spin the thumbwheel and roll the thumbwheel downward to
increment figure upward; upward to increment figure downward. If the drag bar is not
selected, place the pointer on it and push the left button.
Finally, click the Close button.