Furuno FCV-30 - Manual (Page 98)

APPENDIX
AP-2
Zoom range (2m, 5m, 10m, 20m, 40m)
User setting Range1 (2-200: 2m)
Range2 (2-200: 5m)
Range3 (2-200: 10m)
Range4 (2-200: 20m)
Range5 (2-200: 40m)
Shift (0-5000; 0m)
Gain (0.0-10.0; 5.0)
TX rate (0-20; 20)
STC (0-10; 0)
TVG curve (10, 20, 30, 40, manual)
Noise threshold (-30 - +30, 0)
Clutter curve ( Standard, Straight, OFF)
Clutter ( 0, 1, 2, 3, 4, 5, 6, 7)
Color resolution ( OFF (0.1-3.0; 1.0)
Picture advance (STOP, 1/8, 1/4, 1/2, 1/1, 2/1, 4/1, 8/1, SYNC)
LIne interpolation ( OFF, ON)
Noise limiter ( OFF, NL1, NL2, NL3)
Signal level (0-14; 0)
Echo smoothing ( OFF, 1, 2, 3, 4)
Ping setting ( Internal, External)
Bottom search ( ON, OFF)
User TVG setting (0-40; 20)
Multi-beam TX frequency (Low, Standard, High)
TX pulse length ( Standard, Long)
TX power (Level1, Level2, Level3, Level4, Level5)
Depth/distance (Depth, Distance)
Simul. TX start Rng (100-5000; 1000)
Status Display item ( ADVANCE, SHIFT, ALARM, GAIN, TIMER, TEMP,
L/L, SPEED, COURSE, ROLL, PITCH, HEAVE, P/B, TD)
Window ( Opaque, Transparent)
Display ( Window, Fixed at bottom)
Font size (Small, Standard, Large)
Draft indication ( OFF, ON)
Fish size Fish size histogram Horizontal axis scale (10, 20, 30, 40,
50, 60, 70, 80 90, 100(%))
Vertical axis area (1, 2, 3, 4, 5, 6)
Vertical zoom rate ( 100, 200, 400(%))
Vertical zoom area )7, 6, 5, 4, 3, 2, 1)
White mark ( OFF, ON)
White mark area (Min) (2-1000m; 20cm)
White mark area (Max) (2-1000m; 20cm)
Peak ( OFF, ON)
Target graph Radius scale (2, 3, 4, 5)
4 5
1 2 3
6
(Display)