Freedom9 FREEVIEW 80 - Manual (Page 20)

18
Obtain an IP Address: Select whether the unit uses the IP address entered manually in the
fields above, or obtains an IP address from a DHCP server.
Primary DNS Server: The primary DNS server used for name resolution.
Secondary DNS Server: The backup DNS server used for name resolution in the event the
primary DNS server is unavailable.
Connection Type: Determine the connection speed and duplex of the Ethernet port (Auso
Sense, 10Mbps Half-Duplex, 10Mbps Full-Duplex, 100Mbps Half-Duplex, 100Mbps Full-
Duplex). The recommended settings is “Auto Sense”.
Services Provider: The dynamic DNS service provider used (None, 3322.org, dhs.org,
dyndns.org, myddns.com).
Domain Name: Your registered DDNS domain name.
Login Name: The DDNS account login name.
Login Password: The DDNS account login password.
Use External STUN server to get Public IP to register: Set whether a STUN server should be
used to retrieve the public IP address of the device.
Primary STUN Server IP: If a STUN server is used, this is the primary IP address of the STUN
server.
Secondary STUN Server IP: If a STUN server is used, this is the secondary IP address of the
STUN server in the event the primary server is unavailable.
When Connection should be made: Determine when the unit should connect to a PPPoE
internet connection (Disabled, Connect Always).
Login Name: The login name for the PPPoE account.
Login Password: The login password for the PPPoE account.