Freedom9 FREEVIEW 80 - Manual (Page 32)

30
Figure 34 – Starting Telnet
3. Once the Telnet connection has been made, the screen shown in Figure 35 will be
displayed.
Figure 35 – Telnet Connection
4. Enter the user name and password (Figure 36). The default value for both user name and
password is nothing. It is highly recommended that these be changed as quickly as possible
for security purposes.
Figure 36 – Logging In
5. The main menu shown in Figure 37 will be displayed.
Figure 37 – Main Menu
The following section provides details on the menu options.
Set IP Address
Sets the IP address, Gateway address, and Subnet Mask of the unit.