Freedom9 FREEVIEW 80 - Manual (Page 33)

freeView Power 80 User Manual
31
Set SNMP MIB System
Sets the MIB system group parameters.
Set SNMP Access Control
Sets the Manager IP, Community, and Access Permissions for SNMP access.
Set SNMP Trap Notification
Sets the IP address of computer which will receive the SNMP trap events.
Set UPS Properties
Not used at this time.
Set UPS Devices Connected
Not used at this time.
Set System Time & Time Server
Sets the time, date, and time servers.
Set Web and Telnet User Account
Used to manage the users which have access to the device, including user names, passwords,
and access levels.
Set E-mail
Sets the email settings for log events and notifications.
Reset Configuration to Default
Changes all settings back to their default values.
Set Environment Group
Not used at this time.
Save & Reboot
Saves the settings made during the current session and restarts the device.
Exit Without Saving
Exits the Telnet session without saving any of the changes.
4.4 Telephone Access
The freeView Power 80 can be managed by connecting the unit to a standard analog telephone
line and dialing the telephone number associated with the unit.
Note: Telephone access must be enabled in the web interface for the port that is
to be managed via telephone.