GE 49-8549 - Manual (Page 27)

H
OW
to Set Delay Start of Cleaning
(on some models)
Reminder:
the door.
2. Turn the Oven Temperature Control knob to
SELF CLEAN.
Press the START TIME ON/OFF pad.
4. the HOUR pads to set the
time day you want cleaning to start. The
Self-Clean Cycle will automatically begin
the time selected.
Start is setting the oven timer to start the clean
automatically at a later time than the present
time day.
For example: Let’s say it is and you want the
oven to begin self-cleaning at after you re
finished in the kitchen. The oven is just soiled a
normal amount so the normal Clean Time of 4 hours
and minutes is preferred.
Follow steps prepare the oven for cleaning.
2. the handle to the
it
Never force the latch
handle.
the
3. Turn the Oven Temperature knob to the AUTO
SELF CLEAN position.
4. Press the START TIME ON/OFF pad.
A
HOUR
5. Press the HOUR pad until appears in
the display. The timer is set to start
cleaning in 2 hours. at
The Self-C’lean Cycle will be set to
automatically begin at
and finish
at 1
Both the OVEN ON and the
LATCH DOOR light flash when
the Clean Time is finished.
6. When the LATCH DOOR light flashes, slide the
latch handle to the left far as it will go, turn
Oven Temperature knob to OFF and open the door.
Never force the latch handle. Wait until the LATCH
DOOR light flashes and the latch slides easily.
Forcing the latch handle may damage the door
pa
handle will damage the
door lock mechanism.