Care and cleaning, Control panel and knobs, Oven vent – GE 49-8549 User Manual
Page 30: Metal parts, Painted surfaces, Glass window
CARE AND CLEANING
Control Panel and Knobs
Clean up any spills spatters with
cloth.
heavier
with warm, soapy water.
the
control
with mild liquid dish
and soft cloth. Rub the control panel
lightly.
CAUTION:
not use abrasives any kind on the
panel.
lettering on models with touch
is
to abrasives and pressure.
knobs
may be removed for
remove knob. pull it straight off the
Wash
knobs in soap and
but do
not soak.
Oven Vent
The oven is vented through
opening at the rear
Never cover the opening with aluminum
foil or any other material. This would prevent the
oven vent from working properly.
Metal Parts
use steel wool,
abrasives, ammonia or
commercial oven cleaners. To safely
surfaces:
and then dry with soft cloth.
Painted Surfaces
Painted surfaces include
sides, the control panel
and the
or kick panel front. Clean these
water or vinegar and
solution.
not use commercial oven cleaners, cleansing
powders,
wool or harsh abrasives on any
painted surface.
Glass Window
clean
the outside glass finish,
a
cleaner,
and polish with dry